Hot Melt Adhesive for Sanitary Napkins

• Sanitary Napkin Structural Hot Melt

  Softening Point: 80 - 95°C
  Peel Strength: Medium - High
  Viscosity (150°C): 2500 - 4500 mPa·s
  VOC: < 5 g/L
  Safety: FDA, HG/T 3948-2025

  read more
• Hot Melt Psa

  Softening Point: 70 - 85°C
  Peel Strength: 1 - 3 N/25mm
  Viscosity (150°C): 1500 - 3000 mPa·s
  VOC: Near zero
  Safety: GB 15979
  

  read more
• Psa Hot Melt Adhesive

  Softening Point: 85 - 95°C
  Wet Strength Retention: > 70%
  Viscosity (150°C): 3000 - 5000 mPa·s
  Inner Cohesion: Very High
  Safety: REACH, HG/T 3948
  

  read more
• Elastic Band Adhesive for Sanitary Napkins

  Softening Point: 85 - 95°C
  Creep Recovery Rate: > 95%
  Viscosity (150°C): 2500 - 4500 mPa·s
  Peel Strength: High
  Safety: FDA, HG/T 3948-2025
  

  read more
• Adhesive Specifically for Sanitary Napkin Cores

  Softening Point: 85 - 95°C
  Wet Strength Retention: > 70%
  Viscosity (150°C): 3000 - 4500 mPa·s
  VOC: Very low
  Safety: GB 33372, HG/T 3948
  

  read more
• Low-odor Adhesive for Hygiene Products

  VOC: < 2 g/L
  Skin Irritation: 0 (No irritation)
  Cytotoxicity: Grade 0-1
  Heavy Metals: None
  Safety: ISO 10993, OEKO-TEX
  

  read more
• Sanitary Pad Adhesive

  Softening Point: 80 - 95°C
  180° Peel Strength: 5 - 10 N/25mm
  Viscosity (150°C): 2500 - 4500 mPa·s
  VOC: < 5 g/L
  Safety: FDA, REACH
  

  read more
• Hmt Hot Melt

  Formaldehyde: ≤ 0.02 mg/g
  Phthalates Total: ≤ 0.05%
  Heavy Metals: ≤ 1 mg/kg
  PFAS: None
  Safety: ISO 10993, SGS tested
  

  read more
• Water Soluble Hot Melt Adhesive

  Penetration Time: Reduced by > 30%
  Wet Back: Reduced by > 50%
  Contact Angle: < 60 degrees
  Viscosity (150°C): 2000 - 4000 mPa·s
  Safety: HG/T 3948
  

  read more
• Hot Melt Edgebanding

  Heat Seal Strength: 3 - 8 N/15mm
  Viscosity (150°C): 2000 - 4000 mPa·s
  Working Temp: 130 - 150°C
  VOC: Very low
  Safety: Food grade
  

  read more
• Dots Of Glue

  180° Peel Strength: 1 - 3 N/25mm
  Softening Point: 75 - 85°C
  Viscosity (150°C): 2000 - 3500 mPa·s
  VOC: < 3 g/L
  Safety: FDA 21 CFR 175.105
  

  read more
• Low Temperature Hot Melt Glue

  180° Peel Strength: 1 - 4 N/25mm
  Viscosity (150°C): 1500 - 3000 mPa·s
  Working Temp: 130 - 150°C
  VOC: < 5 g/L
  Safety: HG/T 3948-2025
  

  read more