Sanitary Napkin Structur Al Hot Melt

Product Overview

 

Synthetic rubber-based hot melt adhesive formulated for high-speed automated manufacturing of sanitary napkins, panty liners, and feminine hygiene products. Engineered for multi-layer construction bonding, including core stabilization, non-woven lamination, and backsheet fixation. Delivers balanced green strength, creep resistance, and thermal stability across application temperatures from 150°C to 170°C. Compatible with slot-coating, spray, and multi-line application systems operating at speeds exceeding 600m/min. Formulated to comply with FDA 21 CFR 175.105 requirements for indirect food and skin contact.

 
  • Breathable Adhesive
    Viscosity (160°C): 2,200 - 3,500 cP
    Softening Point: 80°C ± 4°C
    Application Temperature: 140°C - 170°C
    Air Permeability Retention: ≥ 90% (vs non-bonded film)
    Heat...
    read more
  • Skin Friendly Adhesive
    Viscosity (150°C): 3,500 - 5,000 cP
    Softening Point: 78°C ± 4°C
    Application Temperature: 135°C - 160°C
    Skin Irritation Test: Pass (ISO 10993)
    Flexibility at 25°C: High (no...
    read more
  • Hygiene Adhesive
    Viscosity (150°C): 3,000 - 4,500 cP
    Softening Point: 88°C ± 4°C
    Application Temperature: 140°C - 165°C
    Bond Strength (PE to non-woven): ≥ 10 N/25mm
    Setting Speed: 3 - 5 seconds
    read more
 
Key Features

The company conducted a competitive advantage analysis to identify its strengths and weaknesses compared to its rivals.

High Shear Strength

Maintains structural integrity under mechanical stress and body movement.

01

Clean Cut-Off

Eliminates stringing and tailing during high-speed intermittent slot coating or spiral spray application.

02

Low Odor Profile

Deodorized raw material matrix meets hygiene industry standards for skin-contact applications.

03

Thermal Stability

Resists viscosity drift and carbonization during prolonged molten retention in tank melters, preventing nozzle clogging.

04

Substrate Versatility

Bonds polyolefin films (PE/PP), non-woven fabrics, tissue paper, and treated release papers.

05

 

Absorbent Core Integrity Bonding Compound

 

Applications

Core Construction: Securing fluff pulp and Super Absorbent Polymer (SAP) paper layers to polyethylene backsheets.


Non-Woven Lamination: Bonding spunbond and air-through non-woven top sheets to acquisition distribution layers (ADL).


Positioning Fixation: Securing backsheet positioning adhesive strips for undergarment adhesion.


Elastic Attachment: Bonding elastic strands for leg cuffs and wing structures.

 

Bonding Applications

 

Application Zone

Target Substrates

Recommended Coating Method

Performance Focus

Core Matrix

Fluff Pulp / Tissue / PE Film

Slot Coating / Spray

High cohesive strength, creep resistance

Top Sheet Lamination

Spunbond Non-Woven / ADL

Spiral Spray / Slot Die

Low add-on weight, soft hand-feel

Positioning Strip

PE Backsheet / Release Paper

Slot Coating

Controlled peel adhesion, no residue on fabric

Elastic Cuffs

Spandex / Non-Woven

Extrusion / Comb Spray

High dynamic fatigue resistance

 

Technical Specifications

 

Test Property

Typical Value

Test Method

Appearance

Transparent / Light Yellow Solid

Visual

Viscosity (160°C)

3,500 ± 500 mPa·s

ASTM D3236

Viscosity (180°C)

1,800 ± 300 mPa·s

ASTM D3236

Softening Point (Ring & Ball)

105°C ± 5°C

ASTM E28

Open Time

Short (2--4 seconds)

Internal Method

Setting Time

Instant (<1 second)

Internal Method

Density

0.95 g/cm³

ASTM D792

Recommended Operating Temp.

150°C -- 170°C

Equipment Setting

 

 
OEM & ODM Customization
 
01/

Formulation Adjustment: Tailoring open time, setting time, and viscosity profiles to match specific line speeds and open-tank or closed-hose melter configurations (e.g., Nordson, ITW).

02/

Color Matching: Custom pigmentation (water-white, translucent, or specific tint requirements).

03/

Packaging Customization: Available in siliconized release paper cartons, PE film pillows, or fiber drums tailored to automated feeding systems.

04/

Regulatory Documentation: Full documentation support including FDA 21 CFR 175.105 compliance statements, EU REACH restricted substance declarations, and heavy metal test reports.

 

 

Quality Control

Raw Material Inspection: Incoming SIS/SBS polymers, tackifying resins, and plasticizers are tested via FTIR spectroscopy for purity.


Melt Flow & Viscosity Testing: Every production batch undergoes Brookfield viscometer testing according to ASTM D3236 at specified operating temperatures.


Thermal Stability Verification: Samples are held at 180°C for 72 hours in laboratory testing ovens to monitor color stability and viscosity change.


Peel & Shear Testing: Standardized laminate samples are tested on tensile testers to verify bond strength on actual client substrates.


Traceability: Each master carton is labeled with a unique batch number linked to retained lab samples and electronic Certificate of Analysis (CoA) archives.

Residue-Free Backing Adhesive For Sanitary Pads

 

Packaging & Shipping
 

The company conducted a competitive advantage analysis to identify its strengths and weaknesses compared to its rivals.

Standard Packaging

20kg master cartons containing silicone-coated release film blocks (1kg/block or 5kg/block).

Alternative Formats

1kg pillow bags, 200kg fiber drums, or custom pallet configurations upon request.

Storage Conditions

Store in a dry, ventilated environment below 35°C. Protect from direct sunlight and heat sources to prevent block agglomeration.

Shelf Life

12 months in unopened original packaging.

 

FAQ

 

Q: What is the recommended melting temperature for running this adhesive on high-speed lines?

A: Operate tank and hose temperatures between 150°C and 170°C (verified via ASTM D3236 testing parameters). Exceeding 180°C for extended periods may accelerate thermal degradation and charring.

Q: Can this adhesive be used on both PE film and breathable non-woven substrates?

A: Yes. The formulation is balanced for polar and non-polar substrates commonly used in feminine hygiene converting.

Q: How can stringing issues be resolved during intermittent spraying?

A: Stringing is typically caused by low air pressure, insufficient atomization air temperature, or running temperatures that are too low. Adjust atomization air pressure and ensure hose temperatures match the tank setting.

Q: Are trial samples available for laboratory evaluation?

A: 5kg trial samples are available for qualified converters and R&D laboratories along with complete technical data sheets (TDS) and CoAs. Freight terms and sample requests can be submitted via the quote form below.

 

modular-1
Request a Quote

Submit your technical requirements, line speed parameters, and substrate specifications to receive a formal quotation, technical data sheet (TDS), and sample allocation.
Required Inquiry Details: Company Name, Target Application (Core/Elastic/Positioning), Line Speed (m/min), Estimated Annual Consumption (Tons), Delivery Port / Destination.

As one of the most experienced sanitary napkin structur al hot melt manufacturers in China, we also support customized service with low price. Please feel free to buy discount sanitary napkin structur al hot melt made in China here from our factory. For pricelist, contact us now.

hygiene napkin adhesive medium temperature, industrial pressure sensitive adhesive, low temp adhesive for automated production