Heat Seal Strength: 3 - 6 N/25mm
Softening Point: 75 - 90°C
Viscosity (150°C): 2000 - 4000 mPa·s
Plasticizer Migration: < 0.5%
Safety: HG/T 3948-2025
China high cohesion metallocene adhesive Manufacturers Factory Suppliers
The hot melt adhesive for assembly line, side tape adhesive for high speed line, hot melt glue for plastic bonding has excellent quality and reasonable price, since it was put into the market, it has been favored by users and caused great social repercussions. We ensure the high quality and excellent performance of the high cohesion metallocene adhesive, and resolutely prevent unqualified products from leaving the factory. We attach great importance to technology development, accumulation and maintenance, process research and development ability and product innovation ability. We hope that more foreign enterprises and customers can see our good products and enjoy our professional services We are constantly seeking new and innovative ways to improve our products and services. Under the guidance of the "market orientation, brand development" strategic policy, the company has achieved steady development, insists on introducing technology and capital investment, attaches importance to the training of talents, builds a group of comprehensive talents, and also lays a solid foundation for product quality and customer service basis! Our company has a complete customer service system, covering pre-sales, sales, and after-sales. Professional technical support engineers can provide all-weather support services from pre-consultation, on-site surveys, sample analysis, program customization, operation training, and post-maintenance. Our one-stop service system can ensure customers get a greater return on investment. The company guarantees the quality of its products with a strict quality control system for purchases and sales, and its good reputation has been trusted and supported by customers.
-
![Heat Resistant Hot Glue]()
-
![Super-Strength Diaper Construction Hot Melt Adhesive]()
Super-Strength Diaper Construction Hot Melt AdhesiveMelt Viscosity (160°C): 4000 – 6500 mPa·s.read more
Softening Point: 90°C – 105°C.
Peel Strength: Industry-leading high structural tack.
Safety: Solvent-free, low VOC, and compliant with... -
![Medium-Performance Nappy Hot Glue]()
Medium-Performance Nappy Hot GlueApplication Temp: 140°C – 160°C.read more
Melt Viscosity (150°C): 2500 – 4500 mPa·s.
Softening Point: 80°C – 95°C.
Appearance: Light yellow transparent block/granule. -
![Wet-State Structural Reinforcement Resin]()
Wet-State Structural Reinforcement ResinWet Strength Retention: ≥70% after immersion in saline/urine.read more
Viscosity: Optimized for penetration into porous core materials.
Stability: Resistant to yellowing and chemical... -
![Standard Green Diaper Construction HMA]()
Standard Green Diaper Construction HMASolid Content: 100% (Solvent-free).read more
Application Temperature: 140°C – 160°C.
Compliance: REACH, FDA 21 CFR 175.105, and HG/T 3948-2025.
Open Time: 8 – 15 seconds (Optimized for... -
![End-Seal Hot Melt For Baby Diapers]()
End-Seal Hot Melt For Baby DiapersApplication Temp: 140°C – 160°C.read more
Melt Viscosity (150°C): 2000 – 4000 mPa·s.
Softening Point: 75°C – 90°C.
Texture: Soft and flexible (Low hardness). -
![Leg-Cuff Elastic Strand Anchoring Glue]()
Leg-Cuff Elastic Strand Anchoring GlueCreep Resistance: Premium-grade retention (>90%).read more
Service Temperature: 140°C – 170°C.
Base: High-strength SBC/SIS system.
Appearance: Water-white to pale yellow transparent. -
![Diaper Multi-Layer Lamination Hot Melt Adhesive]()
Diaper Multi-Layer Lamination Hot Melt AdhesiveProduct Description Innovation in diaper thinness relies on the efficiency of layer bonding, and our Diaper Multi-Layer Lamination Hot Melt Adhesive (Model 2788) is at the core of this technology....read more -
![Diaper Structural Adhesive]()
Diaper Structural AdhesiveWet Strength Retention > 70% 180° Peel Strength 6 - 12 N/25mm Loop Tack 8 - 15 N/25mm Viscosity (150°C) 2500 - 4500 mPa·s Safety HG/T 3948-2025, FDAread more -
![Diaper Rubber Band Adhesive]()
Diaper Rubber Band AdhesiveCreep Displacement: < 1 mmread more
Creep Recovery Rate: > 95%
Viscosity (150°C): 2500 - 4500 mPa·s
180° Peel Strength: 8 - 15 N/25mm
Safety: HG/T 3948-2025, FDA -
![Metallocene Adhesive]()
Metallocene AdhesiveCreep Displacement: < 1 mmread more
Creep Recovery Rate: > 95%
Viscosity (150°C): 2500 - 4500 mPa·s
180° Peel Strength: 8 - 15 N/25mm
Safety: HG/T 3948-2025, FDA -
![Heat Melt Adhesive]()
Heat Melt AdhesiveSoftening Point: 70 - 85°Cread more
Viscosity (150°C): 1500 - 3000 mPa·s
Plasticizer Migration: < 0.5%
SAP Absorbency Loss: < 3%
Lynda Hudson
I have received the product, the quality is good, and the packaging is very careful.
Nicholas Livingstone
The service of this company is really very professional, we are really lucky to meet such a partner, and hope to continue to cooperate with them next time.
Joseph Vincent
This company has provided us with fast and reliable service, so we will definitely recommend it to others as well.
Misty Flowers
The professional, direct, sincere, and experienced team of this supplier left a deep impression on us, and it is worth learning from us.
Cora Colon
We are very pleased with the variety of products and the fact that they can be made to order! We look forward to working with you next time.
Brian Baumgartner
This company sent me samples and professionally explained the relevant content of the product, very nice!
The ability of independent innovation is of great significance to improving the product design and international competitiveness of our heat resistant hot glue for furniture assembly, hot melt adhesive for lamination high strength, automotive heat melt adhesive. As one of the most experienced high cohesion metallocene adhesive manufacturers in China, we also support customized service with low price. Please feel free to buy discount high cohesion metallocene adhesive made in China here from our factory. For pricelist, contact us now.