China footwear hot melt adhesive high strength Manufacturers Factory Suppliers

Our company closely follows the requirements of the times for the enterprise, creates and manufactures the diaper rubber band adhesive, synthetic wet strength adhesive, industrial hot melt glue sticks needed by the consumers, so as to meet the market demand. As a leader in the direction of footwear hot melt adhesive high strength industry development, we are consolidating our industrial roots and strengthening our development strength to realize the layout and operation of the whole industry chain. Our company values trust, integrity, and professionalism above all else. We pride ourselves on maintaining the highest standards of professionalism, ethics, and accountability. We are very optimistic about the future sales situation, and we are also full of confidence in the future development of the company. Our products are known for their reliability, durability, and affordability. Our company has a commitment to sustainability and minimizing our impact on the environment.

High Strength Hot Melt Glue
180° Peel Strength: 15 - 25 N/25mm
Softening Point: 90 - 105°C
Viscosity (160°C): 4000 - 6500 mPa·s
Creep Displacement: < 1 mm
Safety: FDA, HG/T 3948-2025
read more
Super-Strength Diaper Construction Hot Melt Adhesive
Melt Viscosity (160°C): 4000 – 6500 mPa·s.
Softening Point: 90°C – 105°C.
Peel Strength: Industry-leading high structural tack.
Safety: Solvent-free, low VOC, and compliant with...
read more
Lateral Side-Tape Fixing Glue
Application Temp: 150°C – 170°C.
Peel Strength: Very high; resistant to mechanical shearing.
Cohesion: Excellent; zero residue transfer.
Appearance: Light yellow transparent blocks.
read more
Standard Green Diaper Construction HMA
Solid Content: 100% (Solvent-free).
Application Temperature: 140°C – 160°C.
Compliance: REACH, FDA 21 CFR 175.105, and HG/T 3948-2025.
Open Time: 8 – 15 seconds (Optimized for...
read more
Diaper Multi-Layer Lamination Hot Melt Adhesive
Product Description Innovation in diaper thinness relies on the efficiency of layer bonding, and our Diaper Multi-Layer Lamination Hot Melt Adhesive (Model 2788) is at the core of this technology....
read more
Elastic Waistband Bonding Glue For Nappies
Base Polymer: Premium SIS (Styrene-Isoprene-Styrene).
Creep Resistance: ≥90% retention under high tension.
Viscosity: Optimized for spiral and fiber spray application.
Odor:...
read more
Diaper Rubber Band Adhesive
Creep Displacement: < 1 mm
Creep Recovery Rate: > 95%
Viscosity (150°C): 2500 - 4500 mPa·s
180° Peel Strength: 8 - 15 N/25mm
Safety: HG/T 3948-2025, FDA
read more
Polyolefin Hot Melt
Plasticizer Migration: < 0.5%
180° Peel Strength: 6 - 12 N/25mm
Loop Tack: 8 - 15 N/25mm
Viscosity (150°C): 2500 - 4500 mPa·s
Safety: FDA, REACH
read more
Hot Melt Adhesive Liquid
180° Peel Strength (Dry): 6 - 10 N/25mm
Wet Strength Retention: > 75%
Viscosity (150°C): 2500 - 4500 mPa·s
MVTR Loss: < 10%
Safety: FDA, HG/T 3948-2025
read more
Amber Hot Glue
VOC: < 5 g/L
180° Peel Strength: 5 - 10 N/25mm
Loop Tack: 8 - 12 N/25mm
Viscosity (150°C): 2500 - 4500 mPa·s
Safety: FDA, REACH
read more
Wet Strength Adhesive
Wet Strength Retention: > 75%
Softening Point: 85 - 95°C
Viscosity (150°C): 3000 - 5000 mPa·s
SAP Absorbency Loss: < 5%
Safety: HG/T 3948-2025
read more
Heat Melt Adhesive
Softening Point: 70 - 85°C
Viscosity (150°C): 1500 - 3000 mPa·s
Plasticizer Migration: < 0.5%
SAP Absorbency Loss: < 3%
read more

Reviews

John Jimenez

This supplier's products are affordable but the workmanship is not sloppy at all. I will visit again next time I need it.

Robert Gable

Despite being pressed for time, their customer service staff was attentive to providing professional advice. We greatly appreciate their patience.

Curtis Wilson

This manufacturer has advanced production technology, strong production capacity and modern production base, so the product quality is very stable and the delivery is very fast.

Dean Luczak

Give a good review, I was stunned when I saw this product for the first time, it is really clear and bright, it refreshed my understanding of the same product, it is really amazing!

Curtis Simpson

The company has always been in line with the purpose of taking credit as the foundation and winning with quality, and has won the unanimous praise and trust of our company!

Gale Nguyen

The workmanship of the goods is very exquisite, and the service provided by the staff is also very good.

We can provide suitable heat resistant hot glue for automated line, hot melt glue for industrial component assembly for the different needs of customers. As one of the most experienced footwear hot melt adhesive high strength manufacturers in China, we also support customized service with low price. Please feel free to buy discount footwear hot melt adhesive high strength made in China here from our factory. For pricelist, contact us now.